Non-discriminatory building design
This article needs more work. To help develop this article, click 'Edit this article' above.
Contents |
[edit] Background
Over the last two to three decades there has been great progress in making the built environment (buildings, streets and transportation) more accessible, especially for people with disabilities and access problems. This is reflected in the introduction of Acts, codes, standards and regulations such as the Disability Discrimination Act (DDA 1995) and it’s successor the Equality Act (2010). For buildings, more specific requirements are stipulated in the Building Regulations Part M (2004, amended 2013) and in British Standards. NB See Access and inclusion in the built environment: policy and guidance for more information.
[edit] Experiential discrimination
Experiential discrimination occurs when not all users get to enjoy the same experience of a building or building feature. For example, there should be one entrance that serves, rather than a “special” entrance for wheelchair users. Such discrimination should designed-out when consideration is made of people's different strengths and weaknesses in physical, sensory and cognitive areas (including phobias).
An example of experiential discrimination is when a building has a central area that is served by escalators. Those who do not wish to use, or cannot safely use, the escalators require a lift. The lift should have a window so that those who use it are not denied the experience of appreciating the space (and also to support those with claustrophobia). A further, enclosed lift would support those who have agoraphobia (fear of open spaces, or those spaces perceived as hard to escape from). Passengers would thus be given a choice of lift type to better serve their preferences.
For those who find long distances a barrier, good design would provide seating at intervals to allow rest and recovery. This is of particular importance on staircases where seats half way up a staircase can enable people to rest with dignity. A flip-down seat in a lift can offer respite in crowded lifts, or if lift journey times are long.
The built environment is predominantly designed for right-handed users (in terms of door openings, light switch locations, etc.), however, studies have shown that between 10 and 30% of the population is left-handed. Additionally, people who have strokes are often affected on the left-hand side of the brain, which affects the right-hand side of the body.
Signage can also be misinterpreted. The international sign for disability is the white wheelchair symbol on a blue background. This is not meant to be a “for wheelchair users” sign but is often interpreted as such. A pregnant lady, for example, may see the symbol on a lift and decide that they should not use it (self-discrimination) and hence struggle on a staircase with shopping and the unnecessary risk of tripping/ falling.
[edit] Conclusion
Designers, and others who bring designs into realisation, do not deliberately discriminate against users or persons with particular disability, however there is inherent discrimination in the buildings that we create. It is hoped that future generations of designers will become more empathetic to the needs of a wider range of users and therefore help create built environments that can be used and enjoyed by a wide spectrum of users in a natural, unforced, way.
[edit] Related articles on Designing Buildings
- Access consultant.
- Access and inclusion in the built environment: policy and guidance.
- Changing lifestyles.
- Inclusive design.
- Lifting platform.
- Stairlift.
- The London Plan.
- Wheelchair platform stairlifts.
[edit] External references
- The Lifetime Homes.
- Supplementary Planning Guidance in relation to the Olympic Legacy.
- Supplementary Planning Guidance: Planning for Equality and Diversity in London (2007).
- Supplementary Planning Guidance: Achieving an Inclusive Environment (2004).
- The Equality Act 2010.
- Part M of Building Regulations.
- Approved Document M.
- The Principles of Inclusive Design.
- ODA Inclusive Design Standards (2008).
Featured articles and news
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.
ECA shares advice for those who may be exposed to risks.
How to revolutionise UK housing with MMC
CIC and Supply Chain Sustainability School unveil a plan.
From the UKs largest manufacturer and supplier of lime.
From mud bricks to smart concrete
A brief history from 7000BC to a future on the moon.
Regulator of Social Housing publishes latest fire safety report
Covering remediation of 11 metre plus social housing sector buildings.
Apartment and Duplex Defects Remediation Bill 2024
Approved for priority drafting by Government of Ireland.
The long list with in the frame of key historical events.
Competence frameworks for sustainability in the built environment
Code of practice, core criteria consultation draft for comment.
New Floods Resilience Taskforce
With a wet met office autumn prediction.